AgeSin® UV-D7505 is a modified silicone compound containing an acrylic double bond. Designed primarily for UV光固化 systems, it offers excellent compatibility, leveling ability, and good anti‑graffiti effect. It can also be used in waterborne and solvent‑based paints to provide a permanent hand feel. This product is a cost‑effective alternative to BYK‑UV 3505.
AgeSin® UV-D7505 is a modified silicone compound containing an acrylic double bond. Designed primarily for UV光固化 systems, it offers excellent compatibility, leveling ability, and good anti‑graffiti effect. It can also be used in waterborne and solvent‑based paints to provide a permanent hand feel. This product is a cost‑effective alternative to BYK‑UV 3505.
| Parameter | Value |
|---|---|
| 组成 | Acrylate modified polyether polysiloxane |
| 外观 | Light yellow transparent liquid |
| 活性物质 | 50% |
| 溶剂 | Tripropylene glycol diacrylate (TPGDA) |
| 闪点 | > 100°C |
注：本数据表旨在提供典型测试结果而非出厂标准，具体以产品 COA 为准。
UV curable systems (primary)
溶剂‑based coatings
Waterborne coatings
Excellent leveling and wetting
Good anti‑graffiti performance (marker‑pen repellent)
Permanent slip and hand feel
Broad compatibility with most resin systems
Low foam stability, anti‑crater, and good release effect
0.1 – 1.0% based on total formulation. Can be added at any production stage, including post‑addition.
Leveling | 4 |
Wetting | 4 |
Recoatability | 1 |
Compatibility | 4 |
Slip | 5 |
Low foam stability | 2 |
Anti-crater | 4 |
Release effect | 4 |
0=unavailable 5=very effective
Packaging: 25 公斤 or 200 公斤/桶
Storage: Keep in dry, clean, well‑ventilated warehouse. Avoid light and heat. Protect from leakage, rain and direct sunlight during transportation.
Shelf life: 24 months in original unopened packaging. After use, close container immediately.
A: Yes. It is designed as a direct alternative to BYK‑UV 3505, offering comparable performance in leveling, anti‑graffiti, and slip, with cost advantages.
A: Yes. Although primarily recommended for UV systems, it also works well in waterborne and solvent‑based paints, providing permanent hand feel and good surface properties.
A: It can be added at any stage of production, including post‑addition. Start with 0.1–1.0% based on total formulation and optimize according to your system.
A: Recoatability is rated 1 (low). If recoatability is critical for your application, we recommend conducting compatibility tests before full-scale use.
A: Yes, it offers good resistance against marker pens and other stains, making surfaces easy to clean.
