Synocat® NEM (N‑Ethylmorpholine, CAS 100‑74‑3) is a medium‑strength tertiary amine catalyst specifically optimized for polyester‑based polyurethane flexible foam systems. It effectively promotes the reaction between isocyanate and polyol, while continuing to catalyze the gel reaction after the foam reaches its peak rise, enabling full cell expansion, faster curing, and a more uniform cell structure. With a high purity level of ≥ 99%, Synocat® NEM delivers excellent process stability and batch‑to‑batch consistency for polyurethane manufacturers.
Chemical name: N-Ethylmorpholine;4-ethylmorpholine
Cas No.: 100-74-3
Molecular formula：C6H13NO
Molecular weight：115.17
Molecular structure:
| Item | Standard |
| Appearance | 无色透明液体 |
| Chromaticity | ＜2 |
| Water content | ≤0.2% |
| Content | ≥99% |
Precise Catalysis for Higher Productivity – Fast reaction kinetics shorten demold cycles, significantly increasing production line throughput.
Excellent Surface Cure – Promotes firm foam skin formation, improving appearance and tactile quality, especially in high‑resilience (HR) foam applications.
Superior Blow (Rise) Catalytic Activity – Efficiently promotes the urea (water‑isocyanate) reaction, making it an industry‑standard blowing catalyst for flexible foam.
Optimized Foam Performance – Enhanced open‑cell structure improves air permeability, which is critical for mattress and automotive seating foams.
Dosage Efficiency & Cost Savings – Synocat® NEM typically achieves target reactivity at 10 – 15% lower dosage compared to conventional amine blends.
Excellent Batch Consistency – Strict moisture control at ≤ 0.2% ensures highly stable catalytic activity across all production batches.
Polyester‑based polyurethane flexible slabstock foam – mattresses, furniture cushioning
Automotive seating and interior foam – seats, headrests
Rigid and semi‑rigid polyurethane foams
Molded foam and cold‑cure high‑resilience (HR) foam
Intermediate for organic synthesis – dyes, pharmaceuticals, surfactants
High‑efficiency solvent – coatings, resins, adhesives
Preservatives and emulsifiers – agrochemical formulations
Rubber accelerators
| Performance Parameter | Synocat® NEM | Industry Benchmark | Improvement |
|---|---|---|---|
| Gel Time (Polyester System) | 90 – 110 s | 110 – 130 s | Gel time reduced by 15 – 20% |
| Foam Resilience (Ball Rebound) | 45% | 38 – 42% | Enhanced comfort and durability |
| VOC Emissions | < 50 ppm | 80 – 120 ppm | Meets strict indoor air quality standards |
| Storage Stability | 24 months | 12 – 18 months | Extended shelf life, reduced inventory waste |
190 kg / sealed steel drum (nitrogen blanketed to prevent degradation)
IBC Tote
Store in a cool, dry, well‑ventilated area away from direct sunlight and heat sources.
Keep containers tightly sealed when not in use to prevent moisture absorption and contamination.
Recommended storage temperature: 5 – 30°C.
Shelf life: 24 months in original unopened packaging under recommended storage conditions.
The information provided in this document is based on our current knowledge and is believed to be accurate. However, it is intended for guidance only and does not constitute a specification or warranty of any kind, express or implied. Users should conduct their own tests to determine the suitability of the product for their specific applications. 中固化学集团 assumes no liability for any damages arising from the use of this information or the product. Always refer to the 原料组分 Safety Data Sheet (MSDS) before handling the product.
Synocat® is a registered trademark of 中固化学集团. All rights reserved.
