SINOMER® UVC8007
( phosphate acrylate monomer-Adhesion Promoter,non-methyl)
Sinomer® UVC8007 is a 2F-phosphate acrylate monomer designed as a high-performance additive for UV-curable systems. It is characterized by its hydrophilic nature (while remaining water-insoluble) and its exceptional ability to promote adhesion on difficult substrates. It offers a fast curing rate and is primarily used to enhance the bonding of UV coatings, inks, and adhesives to various metals, plastics.
| 检验项目 (Item) | 指标要求 (Specification) |
| 外观 (Appearance) | 澄清透明液体 |
| 色度 (APHA) | ≤ 300 |
| Viscosity (cps @ 25°C) | 200 - 400 |
| Acid Value (mg KOH/g) | 80 - 105 |
| Specific Gravity (g/cm³) | 1.12 ± 0.02 |
| Refractive Index (25°C) | 1.468 ± 0.005 |
| Active Content (%) | 100 |
Hydrophilic but insoluble in water.
Fast curing rate.
Promotes adhesion to various substrates (e.g., metals, plastics).
Recommended dosage: 1% - 5%.
Sinomer® UVC8007 is recommended for use in:
Vacuum metallization UV coatings (middle coat & topcoat).
UV varnishes for various metals.
Adhesion promoter (for melamine, PMMA, etc.).
UV adhesives (for glass, metal).
UV inks.
25kg,200kg/drum.
存放在干燥、阴凉、通风良好的库房内。
避免受光照和高温加热。
运输过程中做好防漏、防雨与防暴晒保护。
