SINEPOXY® CA-PHE 1031 is a phenalkamine-based epoxy curing agent developed for fast curing, excellent corrosion protection, and cost-effectiveness. It cures rapidly at room and low temperatures, offers good performance on poorly prepared substrates, and is suitable for high-solids coatings. It is widely used in marine coatings, heavy-duty anti-corrosion coatings, tank linings, pipelines, and steel structures.
SINEPOXY® CA-PHE 1031
(Phenalkamine Epoxy Curing Agent for Fast Curing & Low-Surface-Treatment Coatings )
化学名称： SINEPOXY® CA-PHE 1031
基本信息：
SINEPOXY® CA-PHE 1031 is a phenalkamine-based epoxy curing agent developed for fast curing, excellent corrosion protection, and cost-effectiveness.
| 检验项目 (Item) | 指标要求 (Specification) |
| 外观 (Appearance) | Yellowish liquid Visual |
| Color (Gardner) | ≤ 12 GB/T9281.1 |
| Solid content (%) | ≥ 90 GB/T1725-2007 |
| Viscosity @ 25° C (cps) | 3000–6000 GB/T9751.1 |
| Amine value (mg KOH/g) | 500–600 Perchloric acid method |
| Active hydrogen equivalent weight (AHEW) | 50 Calculated |
| Recommended mixing ratio (epoxy equivalent weight 190): 100:25Curing CharacteristicsFilm drying time (wet film: 200 μm) | |
| @25° C (tack-free / hard-dry, hours) | 1.0 / 2.2 GB/T1728-2020 |
| @5° C (tack-free / hard-dry, hours) | 2.0 / 7.5 GB/T1728-2020 |
| @0°C (tack-free / hard-dry, hours) | N/A GB/T1728-2020 |
| Gel time, 50 g @ 25° C (minutes) | 12 |
| Mixing ratio | |
| Liquid epoxy EEW 190 100:25 |
High cost-performance;
Fast curing at both ambient and low temperatures;
Applicable on substrates with low surface preparation;
High solid content and low viscosity, suitable for high-solids coatings.
Suitable for marine, pipeline, industrial, and protective coatings where low surface preparation is required.
20kgs/drum; 200kgs/drum.
Storage:
存放在干燥、阴凉、通风良好的库房内。
避免受光照和高温加热。
运输过程中做好防漏、防雨与防暴晒保护。
Shelf Life:
At least 12 months when stored in original sealed drums at room temperature.
