Agesin® AP-S3038P 是一种改性的树脂-based 附着力促进剂 designed to enhance the 附着力性能用于 unprimed polyolefin substrates. It 是 primarily 应用用于低表面 energy plastics such 作为 PP, PE, TPO,及other challenging materials. This product complies 具有 ROHS 2.0, REACH,及other testing requirements, supported 由 third-party test reports.
AgeSin® AP-S3038P
(Halogen-Free Primer 用于 Enhanced 附着力用于低-表面-Energy Plastics)
Agesin® AP-S3038P 是一种改性的树脂-based 附着力促进剂 designed to enhance the 附着力性能用于 unprimed polyolefin substrates. It 是 primarily 应用用于低表面 energy plastics such 作为 PP, PE, TPO,及other challenging materials. This product complies 具有 ROHS 2.0, REACH,及other testing requirements, supported 由 third-party test reports.
| 检验项目 (Item) | 指标要求 (Specification) |
| 化学组成 (Composition) | Modified 树脂 |
| 外观 (外观) | Pale yellow, transparent |
| Solid Content | 32 ± 2% |
| 密度 (密度) | 0.85 ± 0.02 g/cm³ |
| 粘度 (粘度) | 500 ± 100 mPa·s |
| Working Time | 15–30 minutes |
| Operating Temperature | 15–28 °C |
| Durability Rating | Approx. 2 years indoors at room temperature |
低 environmental impact formulation
Innovative halogen‑free formula reduces halogen‑related quality risks及enhances production 安全
Compatible 具有 UV‑curable 涂料
Suitable 作为 a primer 用于 one‑component 或 multi‑component 涂料体系, especially 用于 UV‑cured 涂料
Easy to apply, no flame 或 corona treatment required
适用于 most PP及PE substrates, 改善 production efficiency
表面 Preparation: Substrate must be intact, clean, dry,及free 自 oil及dust. Use a dedicated cleaner if necessary.
Spray 应用: Dilute the concentrate 作为 recommended及apply using a spray gun (recommended droplet size: 4–6 µm). Recommended dilution ratio: AP‑S3038P : Thinner = 1 : 4 to 1 : 6.
固化: Air‑dry at room temperature 用于 5–15 minutes. 用于 accelerated 固化, bake at 60 °C 用于 3 minutes. Ensure complete drying before further processing.
If poor wetting 或附着力 occurs during use, increase the 涂料 thickness of the promoter.
25kgs/drum
Shelf life 是 6 months when sealed. Products exceeding 6 months may be 应用 after passing quality inspection.
Store 于 a well‑ventilated area away 自 ignition sources. Keep out of reach of children.
Avoid contact 具有水性, ethanol, 或 glass cleaner within three hours after 应用.
When bonding heavy materials, use auxiliary fixtures during the 固化 period.
用于 special chemical compatibility inquiries, please contact our technical service team.
储存: Store 于 a cool, ventilated place. Product 是 flammable.
Shelf Life: 6 months. May be 应用 after expiration if inspection confirms suitability.
The technical data provided herein are typical values obtained under laboratory conditions at 25–30 °C及70 % relative humidity. They are 用于 reference only及shall not be 应用作为 acceptance criteria. Product 性能 may vary under specific 应用 conditions. Users are advised to conduct their own tests to confirm suitability. 储存, transportation,及environmental factors may affect the stability及physical/mechanical 性能指标 of the product.
