AgeSin® RH-A4410S NBP 是一款液体流变改性助剂适用于 medium polar及无溶剂体系涂料体系作为 well 作为 room temperature 固化树脂体系. The 助剂 produces a highly thixotropic flow behavior, 改善 anti-sagging及anti-setting 性能指标. This 助剂可 also be post-added.
This product 是一种 upgraded version based 用于 AgeSin® RH-A4410 NMP, 具有 the 溶剂 replaced 由 the environmentally friendlier N-Butyl Pyrrolidone (NBP).
AGESIN® Rheological agent/Liquid rheology 助剂
AgeSin RH-A4410S NB– Modified polyurea solution
Equivalent 对标替代 RHEOBYK 410;RHEOBYK-7410 ET
| 检验项目 (Item) | 指标要求 (Specification) |
| 化学组成 (Composition) | Modified polyurea solution |
| 外观 (外观) | Yellow to brown liquid |
| 密度 g/cm³ (23℃) | 1.02 - 1.12 |
| 粘度 cps (25℃) | 200 - 700 |
| 溶剂 (溶剂) | N-Butyl Pyrrolidone |
| Active Content % | 52 |
This datasheet 是 intended to give typical results, not standard.Subject to COA.
AgeSin® RH-A4410S NBP 是一款液体流变改性助剂适用于 medium polar及无溶剂体系涂料体系作为 well 作为 room temperature 固化树脂体系. The 助剂 produces a highly thixotropic flow behavior, 改善 anti-sagging及anti-setting 性能指标. This 助剂可 also be post-added.
This product 是一种 upgraded version based 用于 AgeSin® RH-A4410 NMP, 具有 the 溶剂 replaced 由 the environmentally friendlier N-Butyl Pyrrolidone (NBP).
工业涂料:
After being added to the 涂料 system under stirring, the 助剂 will produce a three-dimensional network structure. The thixotropic flow behavior formed 是 very 适用于 preventing sedimentation及anti-sagging 性能 without affecting 流平性.
★Special attention: If it 是应用于 combination 具有 desiccants, discoloration may occur, possibly due to the formation of metal complexes. The rheological effectiveness 于 this case should be evaluated. At standard dosing, there 是 no negative effect 用于 yellowing. 于 suspected 体系, yellowing及higher 助剂 dosages should be evaluated. When the 助剂是应用于 reactive及catalytic 体系及contains nitrocellulose, we recommend testing the 储存 stability of the product.
PVC resins:
Liquid 助剂 are 应用于 many PVC resins to increase thixotropy, allows faster processing of the plastisol during manufacturing, improves anti-setting及anti-sagging behavior. AgeSin® RH-A4410S NBP minimizes floating 于颜料 pastes及controls 涂料 set during baking. Increases stability of PVC foams during mechanical agitation.
AgeSin® RH-A4410S NBP should be added to the 涂料 system under moderate shear force to ensure uniform mixing及rapid dispersion. It does not require special temperature control. The 助剂可 added to the grinding stage及是 also 适用于 post-addition to adjust 粘度. If the 助剂是适用于 this system, there will be a significant increase 于 the rheological effect, depends 用于 time及polarity. Rheological effects 可 generally be evaluated 2-4 hours after mixing. This 助剂是 recommended 用于 medium polar 体系.
0.2%-0.5% 助剂用量 (作为 supplied) based 用于 PVC 树脂 to prevent sedimentation及floating 色泽.
0.5%-1% 助剂用量 (作为 supplied) based 用于 PVC 树脂 to prevent sagging
● 25公斤 / 180公斤/桶 Drum
存放在干燥、阴凉、通风良好的库房内。
避免阳光直射和高温暴晒。
可 stored 用于 24 months 于 the original 包装.
