AGESIN® Fluorocarbon copolymer solution
Product Number: AgeSin® FS-D9013R
Composition ： Fluorocarbon copolymer solution
Appearance： Transparent to slight yellowish clear liquid
Solvent ： Dibasic ester
Active substance ： 13%
Density ： 1.11-1.15g/ml(25±1)℃
Viscosity ： 6-25s(Tu-4 viscometer)(25±0.2)℃
Flash point ： ＞100℃
This datasheet is intended to give typical results, not standard.Subject to COA.
● Solvent-based UV cure
● Good long-wave leveling. Prevent orange peel phenomenon.
● Excellent ability of anti-cratering.
● Fast leveling speed.
● High temperature resistance. Could recoating.
● In systems where silicone additives cannot be used, they are often used as anti-shrinkage additives.
● The excellent anti-cratering effect in common UV primer, does not affect re-coating. It should be noted that it is not applicable in UV vacuum electroplating primer, which will affect re-coating.
Should be diluted with suitable solvent. Could be added at any stage of the production process, including post addition.
Addition to total formulation 0.1-1.0%
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
为水基/溶剂基体系提供配方优化支持
全面涵盖 REACH、FDA 和 GB 标准
准时交货率达99.8%，年产能1万吨保证
