AgeSin® DF-A5063 is a defoamer designed for water-based coatings. It offers excellent foam suppression and defoaming properties and can be used in both clear coat and pigmented paint formulations. It demonstrates good compatibility with a wide range of water-dilutable systems, including pure acrylic emulsions, styrene-acrylic emulsions, PU dispersions, epoxy emulsions, and water-soluble resins.
AgeSin® DF-A5063
(Defoamer for Water based system,similar to Tego Airex 902W)
AgeSin® DF-A5063 is a defoamer designed for water-based coatings. It offers excellent foam suppression and defoaming properties and can be used in both clear coat and pigmented paint formulations. It demonstrates good compatibility with a wide range of water-dilutable systems, including pure acrylic emulsions, styrene-acrylic emulsions, PU dispersions, epoxy emulsions, and water-soluble resins.
组成 | Polyether siloxane emulsion containing hydrophobic particles. |
外观 | Translucent liquid |
密度 (23°C) | 0.96 - 1.06 g/cm³ |
Active Content | 100% |
This data sheet is intended to give typical results, not standard.Subject to COA.
Water-based,UV光固化 system.
Excellent foam suppression and defoaming performance in water-based systems.
Minimizes the risk of cratering.
Can be added as a post-additive.
For optimal performance, it is recommended to add AgeSin® DF-A5063 before grinding or stirring to achieve the best foam suppression effect. It can also be added later in the process, but thorough mixing is essential.
0.05% - 1.0% (as supplied, based on total formulation weight).
The above dosage is based on empirical experience. The optimal amount should be determined through a series of tests.
Water-based industrial coatings
Screen printing inks
UV varnishes
25 公斤 / 180 公斤
存放于干燥、清洁、通风良好的仓库中.
避免受光照和受热.
运输过程中防止泄漏、雨淋和曝晒.
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
