AgeSin® UV-D7505 is a modified silicone compound containing an acrylic double bond. Designed primarily for UV curing systems, it offers excellent compatibility, leveling ability, and good anti‑graffiti effect. It can also be used in waterborne and solvent‑based paints to provide a permanent hand feel. This product is a cost‑effective alternative to BYK‑UV 3505.
AgeSin® UV-D7505 is a modified silicone compound containing an acrylic double bond. Designed primarily for UV curing systems, it offers excellent compatibility, leveling ability, and good anti‑graffiti effect. It can also be used in waterborne and solvent‑based paints to provide a permanent hand feel. This product is a cost‑effective alternative to BYK‑UV 3505.
| Parameter | Value |
|---|---|
| Composition | Acrylate modified polyether polysiloxane |
| Appearance | 浅黄色透明液体 |
| Active substance | 50% |
| Solvent | 三丙二醇二丙烯酸酯 (TPGDA) (TPGDA) |
| Flash point | > 100°C |
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
UV curable systems (primary)
Solvent‑based coatings
Waterborne coatings
Excellent leveling and wetting
Good anti‑graffiti performance (marker‑pen repellent)
Permanent slip and hand feel
Broad compatibility with most resin systems
Low foam stability, anti‑crater, and good release effect
0.1 – 1.0% based on total formulation. Can be added at any production stage, including post‑addition.
Leveling | 4 |
Wetting | 4 |
Recoatability | 1 |
Compatibility | 4 |
Slip | 5 |
Low foam stability | 2 |
Anti-crater | 4 |
Release effect | 4 |
0=unavailable 5=very effective
Packaging: 25 kg or 200kg drum
Storage: Keep in dry, clean, well‑ventilated warehouse. Avoid light and heat. Protect from leakage, rain and direct sunlight during transportation.
Shelf life: 24 months in original unopened packaging. After use, close container immediately.
A: Yes. It is designed as a direct alternative to BYK‑UV 3505, offering comparable performance in leveling, anti‑graffiti, and slip, with cost advantages.
A: Yes. Although primarily recommended for UV systems, it also works well in waterborne and solvent‑based paints, providing permanent hand feel and good surface properties.
A: It can be added at any stage of production, including post‑addition. Start with 0.1–1.0% based on total formulation and optimize according to your system.
A: Recoatability is rated 1 (low). If recoatability is critical for your application, we recommend conducting compatibility tests before full-scale use.
A: Yes, it offers good resistance against marker pens and other stains, making surfaces easy to clean.
