AGESIN® Acrylated Polydimethylsiloxane
Product Number: AgeSin® UV-D7100
Completely replaced– Tego Rad 2100
| Composition | Silicone polyether acrylate with crosslinked free radical |
| Appearance | Light to dark green clear liquid |
| Solvent | — |
| Density | 1.03-1.07g/ml(25±1)℃ |
| Viscosity | 100-800 mPa·s (Rotating viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ≥100℃ |
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure.
● 辐射固化反应型硅酮助剂 to improve leveling and overprint.
● Used for vacuum electroplating primer without affecting the adhesion of aluminum coating.
● Good compatibility in varnish.
Easy to add with pre-diluted solvent the same as that in the coating system.
Can added as post-addition.
Addition to total formulation 0.1-1.0%
Transparency in varnish : 5
Slip : 1
Flow leveling : 3
Stick resistance : 1
Defoaming : 0
0=unavailable 5=very effective
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
运输过程中防止泄漏、雨淋和曝晒。
