SINEPOXY® CA-PHE 1031 is a phenalkamine-based epoxy curing agent developed for fast curing, excellent corrosion protection, and cost-effectiveness. It cures rapidly at room and low temperatures, offers good performance on poorly prepared substrates, and is suitable for high-solids coatings. It is widely used in marine coatings, heavy-duty anti-corrosion coatings, tank linings, pipelines, and steel structures.
SINEPOXY® CA-PHE 1031
(Phenalkamine Epoxy Curing Agent for Fast Curing & Low-Surface-Treatment Coatings )
Chemical Name: SINEPOXY® CA-PHE 1031
General Information:
SINEPOXY® CA-PHE 1031 is a phenalkamine-based epoxy curing agent developed for fast curing, excellent corrosion protection, and cost-effectiveness.
Item Specification Test Method
Appearance | Yellowish liquid | Visual |
Color (Gardner) | ≤ 12 | GB/T9281.1 |
Solid content (%) | ≥ 90 | GB/T1725-2007 |
Viscosity @ 25° C (cps) | 3000–6000 | GB/T9751.1 |
Amine value (mg KOH/g) | 500–600 | Perchloric acid method |
Active hydrogen equivalent weight (AHEW) | 50 | Calculated |
Recommended mixing ratio (epoxy equivalent weight 190): 100:25 Curing Characteristics Film drying time (wet film: 200 μm) | ||
@25° C (tack-free / hard-dry, hours) | 1.0 / 2.2 | GB/T1728-2020 |
@5° C (tack-free / hard-dry, hours) | 2.0 / 7.5 | GB/T1728-2020 |
@0°C (tack-free / hard-dry, hours) | N/A | GB/T1728-2020 |
Gel time, 50 g @ 25° C (minutes) | 12 | |
Mixing ratio | ||
| Liquid epoxy EEW 190 100:25 | ||
High cost-performance;
Fast curing at both ambient and low temperatures;
Applicable on substrates with low surface preparation;
High solid content and low viscosity, suitable for high-solids coatings.
Suitable for marine, pipeline, industrial, and protective coatings where low surface preparation is required.
20kgs/drum; 200kgs/drum.
Storage:
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
运输过程中防止泄漏、雨淋和曝晒。
Shelf Life:
At least 12 months when stored in original sealed drums at room temperature.
