Sinepoxy® CA-DICY IG

搜索
购物车()
English Español Français Türkçe Русский العربية 简体中文
banner

Sinepoxy® CA-DICY IG

Dicyandiamide, CAS 461-58-5, cyanoguanidine, epoxy curing agent

Sinepoxy® CA-DICY IG (CAS 461-58-5) is a high-purity dicyandiamide manufactured as an intermediate for pharmaceuticals, pesticides, and epoxy laminates. This industry-grade product is also used in fertilizers and flame retardants

分享到

Sinepoxy ® CA-DICY IG

(Industrial Grade Dicyandiamide)

Chemical Name: Dicyandiamide, Cyanoguanidine

CAS No.: 461-58-5

MF: C2H4N4

MW： 84.08

Molecular structure：

双氰胺 结构式

产品概述:

Sinepoxy®CA-DICY IG is a white crystalline powder. It is stable when dry, non-flammable, and soluble in water and ethanol. It is primarily used as synthesizing intermediates for pharmaceuticals and pesticides, and can also be used to produce guanidine nitrate, dyeing and printing fixing agents, decolorizing flocculants, adhesives, nitrogen slow-release agents in fertilizers, flame retardants, etc.

出厂标准 :

Appearance

White, free-flowing crystalline powder

Dicyandiamide Content

≥ 99.5 %

Water Content

≤ 0.30 %

Ash Content

≤ 0.05 %

Melting Point

209 - 212 °C

Calcium (Ca) Content

≤ 200 ppm


应用 :

Sinepoxy®CA-DICY IG is an intermediate for synthesis of medicines.Itis used in the production of a wide range of organic chemicalsincluding slow and continues nitrogen release fertilizer,Application pesticides,dye fixing,fire proofing agents,epoxy laminatesfor circuit board,powder coatings and adhesives,watertreatment chemicals,leather and rubber chemicals,explosivesand pharmaceuticals.

包装 :

25kgs/Bag

储存与保质期 :

存放于干燥、清洁、通风良好的仓库中，避免光照和受热。

运输过程中防止泄漏、雨淋和曝晒。

Shelf life: 12months


我们能帮您什么？

我们提供多种选择，帮助您找到适合您应用的产品。

相关产品推荐

Sinepoxy® CA-PEA6327

Modified polyetheramine hardener, nonyl phenol free hardener, epoxy flooring hardener, fast cure epoxy

Sinepoxy CA-PEA6327 is an epoxy hardener based on modified Polyetheramine with Nonyl phenol free , light color, low VOC and fast cure.

  • 化学名称:

    Modified Polyetheramine Epoxy Hardener

  • 胺值:

    290

  • Viscosity(25°C@cps):

    300-500

Sinepoxy® CA-CYA6328

Cycloaliphatic amine hardener, epoxy flooring hardener, fast cure epoxy, yellowing resistant hardener

Sinepoxy CA-CYA6328 is an epoxy hardener based on modified cycloapliphatic amine, light color

  • 化学名称:

    Cycloaliphatic Amine Epoxy Hardener

  • 胺值:

    300

  • Viscosity(25°C@cps):

    250-450

Sinepoxy® CA-DICY MP

DICY Micro Powder ,Dicyandiamide, DICY curing agent, latent epoxy hardener, powder epoxy curing agent

Sinepoxy CA-DICY MP (Micro Powder) is a one component amine epoxy curing agent which is under ultrafine pulverization and used in thermosetting epoxy resin systems as a latent curing agent.

  • 化学名称:

    Micro Powder Dicyandiamide latent Epoxy curing agent

  • Assay,%:

    ≥97.5

  • 外观:

    White powder

Sinepoxy® CA-MTHPA

Methyl tetrahydrophthalic anhydride,MTHPA curing agent, epoxy resin hardener

Sinepoxy® CA-MTHPA is used in epoxy resin curing agents, solvent-free coatings,

  • 化学名称:

    Methyltetrahydrophthalic anhydride

  • Cas No.:

    11070-44-3

  • Viscosity(25℃) mPa.S:

    30-50; 50-70

Sinepoxy® EFM-10

Glycidyl neodecanoate,epoxy reactive diluent, Cardura E10 replacement

The structure of tertiary glycidyl carbonate makes it a unique modifier for coating resins.

  • 化学名称:

    Glycidyl neodecanoate;Neodecanoic Acid Glycidyl Ester

  • Epoxy amount (mmol/kg):

    4100-4300

  • Epoxy molar mass g/mol:

    233-244

Sinomer® PETMP (KKDIK Covered)

环氧固化剂与促进剂, 聚硫醇/巯基化合物固化剂, tetrathiol functional monomer

SINOMER® PETMP is a tetrathiol functional Polythiol/Polymercaptan. can be widely used as an 粘接促进剂, antioxidant cure inhibitor or flexibility modifier in various free radical polymerization systems (such as UV curing). It can also be used as a low temperature curing agent in epoxy curing systems and a high refractive index crosslinking agent in isocyanate crosslinking systems.

  • 化学名称:

    PETMP

  • CAS号:

    7575-23-7

  • 分子式:

    C17H28O8S4

  • 包装:

    25 or 250 kg/ drum

Sinepoxy® DMP-30

2,4,6-Tris(dimethylaminomethyl)phenol,DMP-30 accelerator, K54 replacement

DMP-30 serves as an accelerator for curing agents (polyamide, modified fatty amines, polythiols, cyclic amines).

  • 化学名称:

    2,4,6-Tris(dimethylaminomethyl)phenol

  • Amine value:

    610-635 mg KOH/g

  • Viscosity @25°C:

    128 cps

Sinepoxy® AA-160

Epoxy curing accelerator, latent catalyst, one-component adhesive, composite 原料组分 curing

Sinepoxy AA-160 is a latent accelerator that can reduce curing temperature and shorten reaction time.

  • 化学名称:

    潜在型环氧树脂固化促进剂

  • 含量 (%):

    ≥95.0

  • 分子量:

    223.1

Sinomer® PETMP (KKDIK Covered)

环氧固化剂与促进剂, 聚硫醇/巯基化合物固化剂, tetrathiol functional monomer

SINOMER® PETMP is a tetrathiol functional Polythiol/Polymercaptan. can be widely used as an 粘接促进剂, antioxidant cure inhibitor or flexibility modifier in various free radical polymerization systems (such as UV curing). It can also be used as a low temperature curing agent in epoxy curing systems and a high refractive index crosslinking agent in isocyanate crosslinking systems.

  • 化学名称:

    PETMP

  • CAS号:

    7575-23-7

  • 分子式:

    C17H28O8S4

  • 包装:

    25 or 250 kg/ drum

Sinepoxy® CA-DICY EL

Dicyandiamide, CAS 461-58-5, electronic grade DICY, epoxy curing agent

Sinepoxy® CA-DICY EL (CAS 461-58-5) is a high-purity electronic grade dicyandiamide manufactured for PCB epoxy laminates and food packaging coatings. This 99.8% pure curing agent meets stringent metal ion requirements for critical electronic applications.

  • 化学名称:

    Electronic Grade Dicyandiamide,Cyanoguanidine

  • Assay,%:

    ≥99.8

  • 外观:

    White powder

Sinomer® CA-HC1080 EL

heat-initiated cationic curing agent, epoxy curing agent, K-PURE CXC-1612 alternative, electronic grade curing agent

SINEPOXY® CA-HC1080 EL is a heat-initiated cationic epoxy curing agent manufactured as an alternative to K-PURE® CXC-1612 for electronic coatings and adhesives with low-shrinkage agent offering fast initiation at 80°C for cycloaliphatic epoxy resins.

  • 组成:

    Hexafluoroantimonate blocked amine salt

  • Curuing System:

    Heat-Initiated Cationic Epoxy Curing

  • 外观:

    White powder

  • Initiation Temperature:

    80 °C (for cycloaliphatic epoxy)

Sinomer® CA-HC1090 EL

heat-initiated cationic curing agent, epoxy curing agent, hexafluoroantimonate

SINEPOXY® CA-HC1090 EL is a high-purity, heat-initiated cationic curing agent manufactured for epoxy-based electronic coatings, inks, and adhesives.

  • 组成:

    Hexafluoroantimonate blocked amine salt

  • Curuing System:

    Heat-Initiated Cationic Epoxy Curing

  • 外观:

    White powder

  • Initiation Temperature:

    90 °C (for cycloaliphatic epoxy)

SINEPOXY® CE-P1000

Amino-terminated polyether chain extender

Applications for SINEPOXY® CE-P1000 curing agent include casting moulds and elastomers, coatings, adhesives, sealants, and spraying systems. Because of its ease of operation, SINEPOXY® CE-P1000 curing agent is extremely suitable for site repair.

  • 化学名称:

    Polytetramethylene ether bis (p-aminobenzoate)

  • CAS号:

    54667-43-5

  • 分子式:

    C7H6NO.(C4H8O)n.C7H6NO

SINEPOXY® CE-P650

Amino-terminated polyether chain extender

SINEPOXY® CE-P650 is liquid at room temperature and has excellent site remediation applications. There is no need to prepare the prepolymer first. It can be directly mixed with diisocyanate and then reacted to prepare the required product. The overall physical properties of the product made are similar to those of the traditional thermocuring system with MDI prepolymer.

  • 化学名称:

    Poly(1,4-butanediol) bis(4-aminobenzoate)

  • CAS号:

    54667-43-5

  • 分子式:

    C7H6NO.(C4H8O)n.C7H6NO

SINEPOXY® CA-PHE 1031

Phenalkamine Epoxy Curing Agent for Fast Curing & Low-Surface-Treatment Coatings

SINEPOXY® CA-PHE 1031 is a phenalkamine-based epoxy curing agent developed for fast curing, excellent corrosion protection, and cost-effectiveness. It cures rapidly at room and low temperatures, offers good performance on poorly prepared substrates, and is suitable for high-solids coatings. It is widely used in marine coatings, heavy-duty anti-corrosion coatings, tank linings, pipelines, and steel structures.

  • 化学名称:

    SINEPOXY® CA-PHE 1031

  • Packaging and Shipping:

    20kgs/drum; 200kgs/drum

Sinomer® PM840 PA

5 min cure polymercaptan epoxy curing agent, pre-accelerated hardener, GPM-888 alternative, low temperature epoxy cure

SINOMER® PM840 PA is a pre-accelerated polymercaptan epoxy curing agent manufactured for fast ambient and low-temperature curing, effective even in thin films,used as an alternative to GABEPRO GPM-888 for adhesives, coatings, and electronic encapsulation.

  • 替代方案:

    GABEPRO GPM-888

  • CAS号:

    72244-98-5

  • 包装:

    25 or 220 kg/ drum

  • Viscosity (25℃) , mPas:

    10,000 – 15,000

  • APHA色度:

    ≤20

Sinomer® PM841 M

30-minute epoxy curing agent, modified polythiol curing agent, low temperature curing, GPM-830CB alternative

SINOMER® PM841 M is a modified polythiol curing agent manufactured for 30-minute rapid cure of epoxy resins at low temperatures and in thin films. As an ISO certified supplier, we provide this alternative to GABEPRO GPM-830CB with light color and high transparency.

  • 替代方案:

    GABEPRO GPM-830CB

  • CAS号:

    72244-98-5

  • 包装:

    25 or 220 kg/ drum

  • Viscosity (25℃) , mPas:

    10,000 – 15,000

  • APHA色度:

    ≤40

Sinepoxy® CA-PEA6327

Modified polyetheramine hardener, nonyl phenol free hardener, epoxy flooring hardener, fast cure epoxy

Sinepoxy CA-PEA6327 is an epoxy hardener based on modified Polyetheramine with Nonyl phenol free , light color, low VOC and fast cure. 

  • 化学名称:

    Modified Polyetheramine Epoxy Hardener

  • 胺值:

    290

  • Viscosity(25°C@cps):

    300-500

Sinepoxy® CA-CYA6328

Cycloaliphatic amine hardener, epoxy flooring hardener, fast cure epoxy, yellowing resistant hardener

Sinepoxy CA-CYA6328 is an epoxy hardener based on modified cycloapliphatic amine, light color

  • 化学名称:

    Cycloaliphatic Amine Epoxy Hardener

  • 胺值:

    300

  • Viscosity(25°C@cps):

    250-450

Sinepoxy® CA-DICY MP

DICY Micro Powder ,Dicyandiamide, DICY curing agent, latent epoxy hardener, powder epoxy curing agent

Sinepoxy CA-DICY MP (Micro Powder) is a one component amine epoxy curing agent which is under ultrafine pulverization and used in thermosetting epoxy resin systems as a latent curing agent.

  • 化学名称:

    Micro Powder Dicyandiamide latent Epoxy curing agent

  • Assay,%:

    ≥97.5

  • 外观:

    白色粉末

Sinepoxy® DMP-30

2,4,6-Tris(dimethylaminomethyl)phenol,DMP-30 accelerator, K54 replacement

DMP-30 serves as an accelerator for curing agents (polyamide, modified fatty amines, polythiols, cyclic amines).

  • 化学名称:

    2,4,6-Tris(dimethylaminomethyl)phenol

  • Amine value:

    610-635 mg KOH/g

  • Viscosity @25°C:

    128 cps

Sinepoxy® EFM-10

Glycidyl neodecanoate,epoxy reactive diluent, Cardura E10 replacement

The structure of tertiary glycidyl carbonate makes it a unique modifier for coating resins.

  • 化学名称:

    Glycidyl neodecanoate;Neodecanoic Acid Glycidyl Ester

  • Epoxy amount (mmol/kg):

    4100-4300

  • Epoxy molar mass g/mol:

    233-244

Sinepoxy® CA-MTHPA

Methyl tetrahydrophthalic anhydride,MTHPA curing agent, epoxy resin hardener

Sinepoxy® CA-MTHPA is used in epoxy resin curing agents, 无溶剂 coatings, 

  • 化学名称:

    Methyltetrahydrophthalic anhydride

  • Cas No.:

    11070-44-3

  • Viscosity(25℃) mPa.S:

    30-50; 50-70

Sinomer® PETMP (KKDIK Covered)

Epoxy Hardeners & Accelerator, Polythiol/Polymercaptan/Thiol compounds, tetrathiol functional monomer

SINOMER® PETMP is a tetrathiol functional Polythiol/Polymercaptan. can be widely used as an adhesion promoter, antioxidant cure inhibitor or flexibility modifier in various free radical polymerization systems (such as UV curing). It can also be used as a low temperature curing agent in epoxy curing systems and a high refractive index crosslinking agent in isocyanate crosslinking systems.

  • 化学名称:

    PETMP

  • CAS号:

    7575-23-7

  • 分子式:

    C17H28O8S4

  • 包装:

    25 或 250 公斤/桶

Sinomer® UVU6203CA-3DE

3D Printing Dual-Cure Polyurethane-Polyurea Elastomer, Epoxy Hardeners & Accelerator, Polyurethane Modified Acrylate, Sinepoxy® Epoxy System, Sinomer® UV Oligomer

SINOMER UVU6203CA-3DE is an epoxy-modified cycloaliphatic amine methacrylate curing agent with moderate 粘度, low odor, light color, and anti-yellowing properties.

  • 产品描述:

    双固化环氧改性脂环胺甲基丙烯酸酯固化剂

  • Viscosity (cps@25°C):

    3,500–6,000

  • Amine Value (mg KOH/g):

    280–350

Sinepoxy® AA-160

Epoxy curing accelerator, latent catalyst, one-component adhesive, composite material curing

Sinepoxy AA-160 is a latent accelerator that can reduce curing temperature and shorten reaction time. 

  • 化学名称:

    潜在型环氧树脂固化促进剂

  • 含量 (%):

    ≥95.0

  • 分子量:

    223.1

Sinepoxy® CA-DICY EL

Dicyandiamide, CAS 461-58-5, electronic grade DICY, epoxy curing agent

Sinepoxy® CA-DICY EL (CAS 461-58-5) is a high-purity electronic grade dicyandiamide manufactured for PCB epoxy laminates and food packaging coatings. This 99.8% pure curing agent meets stringent metal ion requirements for critical electronic applications.

  • 化学名称:

    Electronic Grade Dicyandiamide,Cyanoguanidine

  • Assay,%:

    ≥99.8

  • 外观:

    白色粉末

Sinepoxy® CA-DICY IG

Dicyandiamide, CAS 461-58-5, cyanoguanidine, epoxy curing agent

Sinepoxy® CA-DICY IG (CAS 461-58-5) is a high-purity dicyandiamide manufactured as an intermediate for pharmaceuticals, pesticides, and epoxy laminates. This industry-grade product is also used in fertilizers and flame retardants

  • 化学名称:

    Dicyandiamide,Cyanoguanidine

  • Assay,%:

    ≥99.5

  • 外观:

    白色粉末

Sinomer® CA-HC1090 EL

heat-initiated cationic curing agent, epoxy curing agent, hexafluoroantimonate

SINEPOXY® CA-HC1090 EL is a high-purity, heat-initiated cationic curing agent manufactured for epoxy-based electronic coatings, inks, and adhesives.

  • 组成:

    Hexafluoroantimonate blocked amine salt

  • Curuing System:

    Heat-Initiated Cationic Epoxy Curing

  • 外观:

    白色粉末

  • Initiation Temperature:

    90 °C (for cycloaliphatic epoxy)

Sinomer® CA-HC1080 EL

heat-initiated cationic curing agent, epoxy curing agent, K-PURE CXC-1612 alternative, electronic grade curing agent

SINEPOXY® CA-HC1080 EL is a heat-initiated cationic epoxy curing agent manufactured as an alternative to K-PURE® CXC-1612 for electronic coatings and adhesives with low-shrinkage agent offering fast initiation at 80°C for cycloaliphatic epoxy resins.

  • 组成:

    Hexafluoroantimonate blocked amine salt

  • Curuing System:

    Heat-Initiated Cationic Epoxy Curing

  • 外观:

    白色粉末

  • Initiation Temperature:

    80 °C (for cycloaliphatic epoxy)

SINEPOXY® CE-P650

Amino-terminated polyether chain extender

SINEPOXY®  CE-P650 is liquid at room temperature and has excellent site remediation applications. There is no need to prepare the prepolymer first. It can be directly mixed with diisocyanate and then reacted to prepare the required product. The overall physical properties of the product made are similar to those of the traditional thermocuring system with MDI prepolymer.

  • 化学名称:

    Poly(1,4-butanediol) bis(4-aminobenzoate)

  • CAS号:

    54667-43-5

  • 分子式:

    C7H6NO.(C4H8O)n.C7H6NO

SINEPOXY® CE-P1000

Amino-terminated polyether chain extender

Applications for SINEPOXY®  CE-P1000 curing agent include casting moulds and elastomers, coatings, adhesives, sealants, and spraying systems. Because of its ease of operation, SINEPOXY®  CE-P1000 curing agent is extremely suitable for site repair. 

  • 化学名称:

    Polytetramethylene ether bis (p-aminobenzoate)

  • CAS号:

    54667-43-5

  • 分子式:

    C7H6NO.(C4H8O)n.C7H6NO

SINEPOXY® CA-PHE 1031

Phenalkamine Epoxy Curing Agent for Fast Curing & Low-Surface-Treatment Coatings

SINEPOXY® CA-PHE 1031 is a phenalkamine-based epoxy curing agent developed for fast curing, excellent corrosion protection, and cost-effectiveness. It cures rapidly at room and low temperatures, offers good performance on poorly prepared substrates, and is suitable for high-solids coatings. It is widely used in marine coatings, heavy-duty anti-corrosion coatings, tank linings, pipelines, and steel structures.

  • 化学名称:

    SINEPOXY® CA-PHE 1031

  • Packaging and Shipping:

    20kgs/桶; 200kgs/桶

Sinomer® PM841 M

30-minute epoxy curing agent, modified polythiol curing agent, low temperature curing, GPM-830CB alternative

SINOMER® PM841 M is a modified polythiol curing agent manufactured for 30-minute rapid cure of epoxy resins at low temperatures and in thin films. As an ISO certified supplier, we provide this alternative to GABEPRO GPM-830CB with light color and high transparency.

  • 替代方案:

    GABEPRO GPM-830CB

  • CAS号:

    72244-98-5

  • 包装:

    25 或 220 公斤/桶

  • Viscosity (25℃) , mPas:

    10,000 – 15,000

  • APHA色度:

    ≤40

Sinomer® PM839

Epoxy Hardeners, Polythiol/Polymercaptan curing agent

SINOMER®PM839 is a 透明液体 polymer curing agent with thiol (-SH) termination. Excellent properties when combined with amines or polyamines to cure epoxy resins.

  • 替代方案:

    Capcure 3-800;GABEPRO GPM-800;Polythiol QE-340M;Thiocure 1200

  • CAS号:

    72244-98-5;101359-87-9

  • 包装:

    25 或 220 公斤/桶

  • Viscosity (25℃) , mPas:

    12000~14000

  • APHA色度:

    ≤20

Sinomer® PM840 PA

5 min cure polymercaptan epoxy curing agent, pre-accelerated hardener, GPM-888 alternative, low temperature epoxy cure

SINOMER® PM840 PA is a pre-accelerated polymercaptan epoxy curing agent manufactured for fast ambient and low-temperature curing, effective even in thin films,used as an alternative to GABEPRO GPM-888 for adhesives, coatings, and electronic encapsulation.

  • 替代方案:

    GABEPRO GPM-888

  • CAS号:

    72244-98-5

  • 包装:

    25 或 220 公斤/桶

  • Viscosity (25℃) , mPas:

    10,000 – 15,000

  • APHA色度:

    ≤20

+86 15550440621
15668330235
info@sinocurechem.com
您的专属配方专家：
从单体到聚合物，我们拆解每一种可能性！
找到您的完美解决方案
联系我们
15550440621 / 13345119692
Whatsapp
+86 15550440621
info@sinocurechem.com
©2025 中固化学（山东）集团有限公司 版权所有 CNZZ
隐私协议 | Sitemap