AgeSin® RA-FR16

PCE superplasticizer

• Improves water reduction rate and slump retention of PCE

• Enhances storage stability of PCE paste: no viscosity change or discoloration during long-term storage.

• Reduces production costs compared to conventional 还原剂s.

• Stable performance across a broad temperature range (0°C to 65°C).

• Environmentally friendly and safe handling.

• Recommended Dosage

• Use at 0.04‰ - 0.2% of the total reaction mass (optimize via lab tests).

• Recommended initial dosage: 80%-100% of the original 还原剂 amount.

• Synthesis Process

• Add RO water and macromonomer (HPEG or TPEG) to the reactor. Stir until fully dissolved.

• Add oxidizer/initiator at the target temperature.

• Use one of these dosing methods:

• Triple-dosing:

Dose 1: Acrylic acid/HEAA

Dose 2: Chain transfer agent (e.g., thioglycolic acid)

Dose 3: AgeSin® RA-FR16 还原剂

• Dual-dosing:

Dose 1: Acrylic acid/HEAA + chain transfer agent

Dose 2: AgeSin® RA-FR16 还原剂

• Control dosing time to 2-4 hours. Ensure AgeSin® RA-FR16 dosing finishes 15-30 minutes after acrylic acid.

• Maintain temperature for 1-2 hours, then cool, neutralize with alkali, and dilute with water to obtain a clear or pale yellow PCE solution.

25KG drum

Being kept in dry, clean warehouse with well ventilation.

Avoid exposing to light and heating.

运输过程中防止泄漏、雨淋和曝晒。