AgeSin® LA-D5431 is a 聚醚改性有机硅流平剂 with Polyether modified polydimethyl siloxane,provides Low foam stability,used in two-component systems to prevent Benard cells from forming in the formulation even in humid weather.Used in Water-based, Solvent-based, UV Cure coating,Can full replace BYK-331.
AGESIN® 聚醚改性有机硅流平剂
Polyether modified polydimethyl siloxane
Product Name: AgeSin® LA-D5431
Equivalent alternatives: BYK-331
| Composition | Polyether modified polydimethyl siloxane |
| Appearance | Colorless to slightly yellow transparent liquid |
| Solvent | —— |
| Density | 1.02-1.06g/ml(25±1)℃ |
| Viscosity | 100-1500s(Tu-4 viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● Water-based, Solvent-based, UV Cure
● Excellent compatibility in varnish.
● Low foam stability,used in two-component systems to prevent Benard cells from forming in the formulation even in humid weather
● Moderately reduce the surface tension of the system.
● Moderately reduce the friction coefficient of the paint film surface, withcertain slip properties, and improve scratch resistance.
● Good recoating and minimal influence on adhesion of coating films at suitable addition and baking temperature.
It can be added to the coating system after dilution with a suitable solvent. Can be added at any stage of the production process, including post-addition.
Suggest addition:
Addition to total formulation 0.05-0.5%
Transparency in varnish : 5
Defoaming : 4
Dynamic surface tension : 4
Static surface tension : 4
Slip : 3
Prevent orange peel : 2
0=unavailable 5=very effective
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
运输过程中防止泄漏、雨淋和曝晒。
