AGESIN® Polyether modified polydimethyl siloxane
Product Number: AgeSin® LA-D5432
Completely replaced– TEGO Glide 432
| Composition | Polyether modified polydimethyl siloxane |
| Appearance | slight yellowish clear liquid(paste at low temperature) |
| Solvent | —— |
| Density | 1.01-1.05g/ml(25±1)℃ |
| Viscosity | 20-80s(Tu-4 viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure
● Excellent compatibility in varnish.
● Provide a stronger reduction of the surface tension.
● Reduce the friction coefficient. Increase slip and anti-stick.
● Hazy and viscous may occure at low temperatures. It would become clear and flow after heated. This will not influence the quality
Easy to add with pre-diluted solvent the same as that in the coating system. Can add in later step.
Suggest addition
Addition to total formulation 0.01-0.5%
Storage stability
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediatelyafter use.
Transparency in varnish : 5
Defoaming : 1
Dynamic surface tension : 5
Static surface tension : 5
Slip : 4
Prevent orange peel : 1
0=unavailable 5=very effective
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
运输过程中防止泄漏、雨淋和曝晒。
