AgeSin®RH-A5605 is a rheological additive used to improve rheological properties in solvent-free and solvent-based systems, which can greatly improve the anti-sagging performance of the paint system.
AgeSin®RH-A5605 will form a network structure in the entire system, and this network will not break or fail.When using AgeSin®RH-A5605, it can be used alone or in combination with fumed silica and bentonite to achieve a higher coating thickness.
AgeSin®RH-A5605 is an equivalent replacement for BYK-R 605
AGESIN® Rheological agent
RH-A5605 – 改性聚酰胺溶液
Equivalent alternatives: BYK-R 605
Composition : 改性聚酰胺溶液
Appearance : Light yellow liquid
Density g/cm³ (23℃) : 1.04-1.12
Solvent : 苯甲醇
Non-volatile content % : 50
Viscosity cps (25℃) : 700-11000
This datasheet is intended to give typical results, not standard.Subject to COA.
Suggest addition:
0.2-1.0%
Can be added before or after grinding. Adding it after grinding requires sufficient shear force to disperse it into the system.
General Information:
AgeSin®RH-A5605 is a rheological additive used to improve rheological properties in solvent-free and solvent-based systems, which can greatly improve the anti-sagging performance of the paint system.
AgeSin®RH-A5605 will form a network structure in the entire system, and this network will not break or fail.
When usingAgeSin®RH-A5605, it can be used alone or in combination with fumed silica and bentonite to achieve a higher coating thickness.
Specially recommended: polyurethane system/acrylic system/alkyd system
Recommended: epoxy resin system
● 25Kg /200KG Drum
Store in a dry, clean, ventilated warehouse. Avoid exposure to light and high temperature.
Can be stored for 24 months in the original packaging.
