AGESIN® Acrylated Polydimethylsiloxane
Product Number: AgeSin® UV-D7100
Completely replaced– Tego Rad 2100
| 检验项目 (Item) | 指标要求 (Specification) |
| 化学组成 (Composition) | 可自由基交联的聚醚改性有机硅丙烯酸酯 |
| 外观 (Appearance) | 浅至深绿色澄清液体 |
| 溶剂 (Solvent) | — |
| 密度 (Density) | 1.03-1.07g/ml(25±1)℃ |
| 粘度 (Viscosity) | 100-800 mPa·s (Rotating viscometer)(25±0.2)℃ |
| 有效成分 (Active Substance) | 100% |
| 闪点 (Flash Point) | ≥100℃ |
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure.
● Radiation curing reactive silicone additive to improve leveling and overprint.
● Used for vacuum electroplating primer without affecting the adhesion of aluminum coating.
● Good compatibility in varnish.
Easy to add with pre-diluted solvent the same as that in the coating system.
Can added as post-addition.
Addition to total formulation 0.1-1.0%
Transparency in varnish : 5
Slip : 1
Flow leveling : 3
Stick resistance : 1
Defoaming : 0
0=unavailable 5=very effective
● 25KG / 180KG
存放在干燥、阴凉、通风良好的库房内。
避免受光照和高温加热。
运输过程中做好防漏、防雨与防暴晒保护。
