Agesin® UV-D7700D is a reactive silicone additive with acrylate functionality, specifically designed for UV-curable systems. It provides excellent anti-fouling properties, remarkable defoaming capability, and reduced friction coefficient, making it particularly suitable for UV-resistant formulations on PVC flooring and reverse UV varnish primers,better alternative to Tego rad 2700.
AGESIN® Acrylated Polydimethylsiloxane
Product code: AgeSin® UV-D7700D
基本信息：
Agesin® UV-D7700D is a reactive silicone additive with acrylate functionality, specifically designed for UV-curable systems. It provides excellent anti-fouling properties, remarkable defoaming capability, and reduced friction coefficient, making it particularly suitable for UV-resistant formulations on PVC flooring and reverse UV varnish primers,better alternative to Tego rad 2700.
| 检验项目 (Item) | 指标要求 (Specification) |
| 化学组成 (Composition) | 含丙烯酸功能基团的辐射固化反应型有机硅助剂 |
| 外观 (Appearance) | 微黄至黄色微浊液体 |
| 溶剂 (Solvent) | —— |
| 密度 (Density) | 0.96-1.00g/ml(25±1)℃ |
| 粘度 (Viscosity) | 3000-10000 mPa·s |
| (Rotating viscometer)(25±0.2)℃ | |
| 有效成分 (Active Substance) | 100% |
| 闪点 (Flash Point) | ＞100℃ |
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure.
Radiation-curable reactive silicone additive with excellent defoaming ability.
Significantly reduces dynamic friction coefficient and provides a remarkable peeling effect.
In solvent-free UV matte coatings, an addition level of approx. 0.5% already provides excellent anti-graffiti performance.
Recommended to be used with 0.1% AgeSin® UV-D7220 for balanced leveling.
Specially suitable for PVC floor UV anti-stain formulations and reverse UV varnish primers.
Easy to add with pre-diluted solvent the same as that in the coating system.
Can added as post-addition.
Addition to total formulation 0.1-1.0%
Mobility : 0
Slip : 5
Stick resistance : 4
Substance wetting : 0
Defoaming : 5
0=unavailable 5=very effective
| 检验项目 (Item) | 指标要求 (Specification) |
| Name | Ratio Description |
| Sinomer UV Resin | 45% Epoxy or polyurethane type, a functionality >6 is recommended,like UVU6000 and UVE3000 series products. |
| Sinomer DPHA | 12% Multifunctional monomer |
| Sinomer DPGDA | 25% 2-functional monomer |
| AgeSin® UV-D7700D | 2.0% Anti-graffiti additive |
| AgeSin® DP-D2608CR | 1.0% Matting Agent Dispersant |
| Sinocure 1173 | 2.0% Photoinitiator |
| Sinocure 184 | 3.0% Photoinitiator |
| Matting Agent | 10% e.g., E1011 |
| Total | 100 |
25KG / 180KG
存放在干燥、阴凉、通风良好的库房内。
避免受光照和高温加热。
运输过程中做好防漏、防雨与防暴晒保护。
