AgeSin® AG-X7710 & AG-X7720 CLUV – Reactive Silicone 助剂 for UV Anti‑Graffiti 涂料

Two grades. One technology. High‑gloss clarity or matte‑system power.

General Introduction

AgeSin® AG‑X7710 CLUV and AG‑X7720 CLUV are radiation‑curable, reactive silicone 助剂 with acrylate functional groups. They chemically bond into UV coating networks, providing permanent easy‑clean and anti‑graffiti properties without compromising cure speed. Both are 100% active, solvent‑free, and designed for UV curing systems.

However, they serve different formulation needs. One is engineered for high‑gloss clear coats where transparency is critical. The other is built for matte and low‑gloss systems where maximum stain blocking is required – even at the cost of clarity.

AgeSin® AG-X7710 CLUV – For High‑Gloss Clear Coats

Best for: UV high‑gloss varnishes, topcoats, and easy‑clean 涂料 where appearance matters most.

AG‑X7710 provides an excellent balance of clarity, stain resistance, and surface protection. It maintains outstanding film transparency (rated 5/5), good hydrophobicity and oil repellency, and moderate anti‑blocking. It also improves substrate wetting and reduces surface friction.

Application performance (0 = no effect, 5 = excellent):

• Clarity / Transparency:             5

• Stain Resistance:                     4

• Anti‑Blocking:                         3

• Hydrophobicity & Oleophobicity: 3

Typical addition: 0.3 – 1.0% of total formulation.

Ideal for: High‑gloss UV 涂料 where clarity cannot be compromised.

AgeSin® AG-X7720 CLUV – For Matte & Low‑Gloss Systems

Best for: Matte 涂料, textured finishes, and heavy‑duty anti‑graffiti applications where clarity is not a requirement.

AG‑X7720 is the heavy‑duty version specifically recommended for matte or low‑gloss systems. It delivers superior stain resistance (5/5) and excellent anti‑blocking (5/5), making it extremely effective against permanent markers, inks, and aggressive contaminants. Because it reduces clarity, it should not be used in clear, high‑gloss 涂料 – but in matte formulations, this trade‑off is perfectly acceptable in exchange for maximum foul release.

Application performance (0 = no effect, 5 = excellent):

• Clarity / Transparency: 0 (not suitable for clear coats)

• Stain Resistance: 5

• Anti‑Blocking: 5

• Hydrophobicity & Oleophobicity: 3

Typical addition: 0.3 – 1.0% of total formulation.

Ideal for: Matte UV 涂料, industrial anti‑graffiti paints, high‑wear surfaces, and any formulation where gloss is already low and maximum stain protection is needed.

Quick 对比 Table

Formulation Example (High‑Gloss Stain‑Resistant Varnish – using AG‑X7710)

For matte systems using AG‑X7720, replace the anti‑graffiti additive accordingly. Clarity is not a concern in matte formulations.

Incorporation Guidelines

• For easier mixing, pre‑dilute with a solvent from your coating or ink system before adding.

• Can be added at a later stage of production.

• Recommended addition level: 0.3 – 1.0% on total formulation.

Specifications (AG‑X7710 – typical)

AG‑X7720 shares similar physical properties (100% active, solvent‑free, high flash point).

Packaging & Storage

• Packaging: 25 kg or 180 kg drum

• Storage: Keep in dry, clean, well‑ventilated warehouse away from light and heat. Shelf life: 24 months in original unopened container.

Final Recommendation

• Choose AG‑X7710 CLUV – When you need high clarity, good stain resistance, and easy‑clean performance. Ideal for premium UV high‑gloss clear coats.

• Choose AG‑X7720 CLUV – When maximum stain and block resistance is required, and your system is matte or low‑gloss. Perfect for heavy‑duty anti‑graffiti industrial 涂料 where clarity is not a priority.

Both products are backed by reactive silicone chemistry, ensuring permanent, durable surface protection.