AgeSin® RH-A4410S NBP is a liquid rheological additive suitable for medium polar and solvent-free coating systems as well as room temperature curing resin systems. The additive produces a highly thixotropic flow behavior, improving anti-sagging and anti-setting properties. This additive can also be post-added.
This product is an upgraded version based on AgeSin® RH-A4410 NMP, with the solvent replaced by the environmentally friendlier N-Butyl Pyrrolidone (NBP).
AGESIN® Rheological agent/Liquid rheology additive
AgeSin RH-A4410S NB– Modified polyurea solution
Equivalent alternative to RHEOBYK 410;RHEOBYK-7410 ET
组成 | Modified polyurea solution |
外观 | Yellow to brown liquid |
密度 g/cm³ (23℃) | 1.02 - 1.12 |
粘度 cps (25℃) | 200 - 700 |
溶剂 | N-Butyl Pyrrolidone |
Active Content % | 52 |
This datasheet is intended to give typical results, not standard.Subject to COA.
AgeSin® RH-A4410S NBP is a liquid rheological additive suitable for medium polar and solvent-free coating systems as well as room temperature curing resin systems. The additive produces a highly thixotropic flow behavior, improving anti-sagging and anti-setting properties. This additive can also be post-added.
This product is an upgraded version based on AgeSin® RH-A4410 NMP, with the solvent replaced by the environmentally friendlier N-Butyl Pyrrolidone (NBP).
Industrial coatings:
After being added to the coating system under stirring, the additive will produce a three-dimensional network structure. The thixotropic flow behavior formed is very suitable for preventing sedimentation and anti-sagging performance without affecting leveling.
★Special attention: If it is used in combination with desiccants, discoloration may occur, possibly due to the formation of metal complexes. The rheological effectiveness in this case should be evaluated. At standard dosing, there is no negative effect on yellowing. In suspected systems, yellowing and higher additive dosages should be evaluated. When the additive is used in reactive and catalytic systems and contains nitrocellulose, we recommend testing the storage stability of the product.
PVC resins:
Liquid additives are used in many PVC resins to increase thixotropy, which allows faster processing of the plastisol during manufacturing, improves anti-setting and anti-sagging behavior. AgeSin® RH-A4410S NBP minimizes floating in pigment pastes and controls coating set during baking. Increases stability of PVC foams during mechanical agitation.
AgeSin® RH-A4410S NBP should be added to the coating system under moderate shear force to ensure uniform mixing and rapid dispersion. It does not require special temperature control. The additive can be added to the grinding stage and is also suitable for post-addition to adjust viscosity. If the additive is suitable for this system, there will be a significant increase in the rheological effect, which depends on time and polarity. Rheological effects can generally be evaluated 2-4 hours after mixing. This additive is recommended for medium polar systems.
0.2%-0.5% additive dosage (as supplied) based on PVC resin to prevent sedimentation and floating color.
0.5%-1% additive dosage (as supplied) based on PVC resin to prevent sagging
● 25 公斤 /180 公斤/桶
Store in a dry, clean, ventilated warehouse.
Avoid exposure to light and high temperature.
Can be stored for 24 months in the original packaging.
