Agesin DF-D9029 AT is a highly efficient, multi-purpose silicone defoamer suitable for industrial processes and product performance improvement. It is especially effective in solvent-based polyurethane systems and epoxy floor coatings, offering outstanding bubble-breaking performance and rapid elimination of fine bubbles. Thanks to its exceptional efficiency, the required dosage is significantly lower than conventional defoamers. Recommended for non-aqueous systems.
AgeSin® DF-D9029 AT
(High-compatibility silicone defoamer for solvent-based polyurethane and epoxy systems)
Agesin DF-D9029 AT is a highly efficient, multi-purpose silicone defoamer suitable for industrial processes and product performance improvement. It is especially effective in solvent-based polyurethane systems and epoxy floor coatings, offering outstanding bubble-breaking performance and rapid elimination of fine bubbles. Thanks to its exceptional efficiency, the required dosage is significantly lower than conventional defoamers. Recommended for non-aqueous systems.
组成 | Special Organic Polymer Copolymer |
外观 | Light gray translucent liquid |
粘度 @ 25°C | 2000 – 5000 mPa·s |
Solid Content | 100% |
This data sheet is intended to give typical results, not standard.Subject to COA.
溶剂-based
Excellent compatibility
Low dosage requirement
Specially designed for solvent-based polyurethane systems
Recommended dosage: 10 – 1000 ppm, depending on the foam-forming substances in the system. For specific applications, dosage may exceed 1%. Optimal dosage should be determined through small-scale testing.
Shake well before use. Can be diluted with suitable solvent
溶剂-based polyurethane systems
溶剂-based epoxy resins
Flexible sheet production additives
25 公斤 / 120 公斤/ 200 公斤 Drum
存放于干燥、清洁、通风良好的仓库中.
避免受光照和受热.
运输过程中防止泄漏、雨淋和曝晒.
Keep intact 6 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
