AgeSin® DP-L1800 is designed for the dispersion of organoclays and is used in the manufacturing of offset black inks and toluene-based gravure black inks. It is also suitable for dispersing organic pigments and carbon black in the production of color masterbatches.
AgeSin® DP-L1800
(Hyper分散剂,Alternative to Solsperse 8000)
组成 | 100% active polymeric 分散剂 |
外观 | Brown waxy solid or viscous liquid |
Pour Point | Approx. 35 °C |
De组成 Temperature | > 280 °C |
闪点 | 250 °C |
Solid Content | 100% |
This datasheet is intended to give typical results, not standard.Subject to COA.
溶剂-based
Color pastes, pigment powders, color masterbatches
Offset black inks, Toluene-based gravure black inks
Paints (溶剂-based)
For Offset & Gravure Black Ink Production:
Recommended dosage is 6% - 10% of the carbon black weight.
For Organoclay Dispersion:
AgeSin® DP-L1800 should be added during the dispersion stage of the organoclay or kaolin. Addition during the pre-gel stage is recommended.
Important Note: As AgeSin® DP-L1800 significantly reduces 粘度, the organoclay content in the pre-gel may need to be appropriately increased to maintain proper system 粘度 and shear force, thereby enhancing dispersion effectiveness. Alternatively, the dosage of AgeSin® DP-L1800 can be reduced to a suitable level while keeping the organoclay amount fixed.
Recommended Dispersion Procedure:
In a high-speed mixer, blend the 溶剂 and organoclay at approximately 3000 rpm for about 10 minutes.
Add AgeSin® DP-L1800 and continue mixing at 3000 rpm for 5 minutes.
Assess the dispersion quality by drawing down a sample on a glass plate.
● 25 公斤 /50 公斤/桶
Store in a dry, clean, ventilated warehouse.
Avoid exposure to light and high temperature.
Can be stored for 24 months in the original packaging.
