AgeSin®DP-A2662 is a VOC- and solvent-free wetting and dispersing agent for solvent-borne and solvent-free systems, floor coatings, and printing inks. With its broad compatibility, it is particularly recommended for pigment concentrate production. Its 100% active content makes it especially suitable for high-solids and solvent-free systems.
AgeSin® DP-A2662
(Wetting and dispersing additive,similar to DisperByk-2155)
AgeSin®DP-A2662 is a VOC- and solvent-free wetting and dispersing agent for solvent-borne and solvent-free systems, floor coatings, and printing inks. With its broad compatibility, it is particularly recommended for pigment concentrate production. Its 100% active content makes it especially suitable for high-solids and solvent-free systems
组成 | Polyglycol polyester modified polyolefin imine |
外观 | Light yellow transparent liquid |
粘度 @25°C (cps) | 500-5000 |
Acid Value (mg KOH/g) | 1-10 |
Amine Value (mg KOH/g) | 20-60 |
密度 @23°C (g/cm³) | 1.00-1.20 |
Active Content (%) | 100 |
This data sheet is intended to give typical results, not standard.Subject to COA.
溶剂-borne and solvent-free
Stabilizes pigments through steric hindrance
Provides identical charge to different pigments, preventing co-flocculation
Enhances gloss and color strength
Increases transparency of transparent pigments and hiding power of opaque pigments
Reduces paste viscosity
Industrial coatings ●
Wood coatings ●
Automotive coatings ●
Architectural coatings ○
Printing inks ○
(● Recommended ○ Suitable)
For best performance, add to the grinding stage. For resin-free dispersion: pre-mix solvent and additive under stirring before adding pigments. For resin-containing dispersion: pre-mix resin solution, solvent, and additive thoroughly before adding pigments.
Inorganic pigments: 5%-10%
Titanium dioxide: 1%-3%
Organic pigments: 10%-35%
Carbon black: 15%-75%
● 25 公斤 / 50 公斤
存放于干燥、清洁、通风良好的仓库中.
避免受光照和受热.
运输过程中防止泄漏、雨淋和曝晒.
