AgeSin® DF-D9698 is a polyether-modified silicone 消泡剂 specifically designed for latex and waterborne systems. It combines the powerful foam-breaking performance of silicone-based 消泡剂s with the excellent compatibility of non-silicone 消泡剂s, making it suitable for a wide range of waterborne formulations. The product provides long-lasting defoaming effectiveness and good system stability,can be used as the alternative to Tego Foamex 1488.
AgeSin® DF-D9698
(Silicone 消泡剂/deaerator for Waterborne Systems | Alternative to Tego Foamex 1488 )
AgeSin® DF-D9698 is a polyether-modified silicone 消泡剂 specifically designed for latex and waterborne systems. It combines the powerful foam-breaking performance of silicone-based 消泡剂s with the excellent compatibility of non-silicone 消泡剂s, making it suitable for a wide range of waterborne formulations. The product provides long-lasting defoaming effectiveness and good system stability.
Composition | Polyether-modified silicone |
Appearance | Milky white liquid |
Ionicity | Non-ionic |
Viscosity (25°C) | 1,000 – 3,000 mPa·s |
Solid Content | 25 ± 1% |
Water Solubility | Soluble in water |
This data sheet is intended to give typical results, not standard.Subject to COA.
Good system stability
Long-lasting defoaming effectiveness
Excellent foam suppression and bubble release
Combines the high performance of silicone 消泡剂s with the good compatibility of non-silicone types
Suitable for a wide range of latex-based systems
Latex paints
Waterborne inks
Waterborne overprint varnishes
Waterborne wood coatings
Waterborne adhesives
Acrylic emulsion systems
Can be added directly during production, or pre-dispersed before use.
For paint production, it is recommended to add 50% of the total dosage before grinding, and the remaining 50% after grinding.
0.2 – 0.5% based on total formulation. This level is generally sufficient to effectively eliminate foam and prevent its re-formation. Optimal dosage should be determined through laboratory testing.
Packaging: Available in 25 kg,50kg and 200 kg drums.
Storage: Store in a cool, dry, well-ventilated place in the original, tightly sealed container. Protect from direct sunlight, heat sources, and frost.
Shelf Life: 12 months when stored under recommended conditions.
Disclaimer: The information provided is based on our current knowledge and experience. It is intended as a guide and does not constitute a warranty of specific properties. We recommend testing the product's suitability for your specific process and application.
