Agesin DF-D9024 is a highly efficient 消泡剂 based on a polyether-modified polysiloxane copolymer, enhanced with a specially structured active synergist. This formulation provides superior defoaming performance while maintaining excellent compatibility. It is suitable for polyurethane and acrylic emulsion systems and can be widely used in wood and furniture coatings, architectural paints, automotive OEM coatings, paper coatings, sealants, and adhesives. It is particularly recommended for addition during the paint let-down phase due to its excellent compatibility.
AgeSin® DF-D9024
(消泡剂 for aqueous systems,similar to BYK-024 )
Agesin DF-D9024 is a highly efficient 消泡剂 based on a polyether-modified polysiloxane copolymer, enhanced with a specially structured active synergist. This formulation provides superior defoaming performance while maintaining excellent compatibility. It is suitable for polyurethane and acrylic emulsion systems and can be widely used in wood and furniture coatings, architectural paints, automotive OEM coatings, paper coatings, sealants, and adhesives. It is particularly recommended for addition during the paint let-down phase due to its excellent compatibility.
Composition | Polyether-modified polysiloxane |
Appearance | Transparent to slightly hazy liquid |
Ionic Nature | Non-ionic |
Viscosity @ 25°C | 100 – 1,000 mPa·s |
Non-Volatile Matter | > 90 % |
This data sheet is intended to give typical results, not standard.Subject to COA.
● Water-based.
100% active
Excellent defoaming efficiency
Suitable for grinding processes
Recommended Dosage: 0.1% - 0.5% on total formulation weight. The optimal dosage should be determined through testing for each specific system.
This product is especially suitable for addition to the grind. For better incorporation, pre-dilution with a solvent is recommended.
If used during the ink/paint let-down phase, high-shear mixing or pre-dilution is required.
Water-based pigment grinding processes
Styrene/Acrylic (S/A) systems
Pure Acrylic (纯丙烯酸酯低聚物) emulsions
Polyvinyl Alcohol (PVA) systems
Water-based Epoxy systems
● 25KG / 50KG/ 200KG Drum
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
运输过程中防止泄漏、雨淋和曝晒。
Keep intact 6 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
