SINOMER UVU6203-3DK1 is a two-component (A/B) dual-cure aliphatic polyurethane polyurea methacrylate elastomer resin with skin-friendly properties. Designed for DLP 3D printing, it features high precision, moderate viscosity, no NCO or organotin, low odor, light color, excellent toughness, tensile strength, tear resistance, flexibility, elongation at break, elasticity, skin-friendly texture, photosensitivity, and wear resistance.
SINOMER UVU6203-3DK1
Product Name: Dual-Cure Aliphatic Polyurethane Polyurea Methacrylate Elastomer Skin-Friendly Resin
Application: DLP 3D Printing
Chemical structure:
UVU6203-3DK1 is a two-component (A/B) dual-cure aliphatic polyurethane polyurea methacrylate elastomer resin with skin-friendly properties. Designed for DLP 3D printing, it features high precision, moderate viscosity, no NCO or organotin, low odor, light color, excellent toughness, tensile strength, tear resistance, flexibility, elongation at break, elasticity, skin-friendly texture, photosensitivity, and wear resistance.
| Property | Value |
|---|---|
| Appearance | Milky white viscous liquid |
| Color (Pt-Co) | ≤40# |
| Viscosity (25°C, mPa·s) | 8,000–12,000 |
| NCO Content | 0% |
| Elongation at Break (%) | 350–700 |
| Tensile Strength (MPa) | 10–20 |
| Tear Strength (N) | >40 |
| Shore Hardness (A) | 45–65 |
| Packaging (kg/drum) | 20/200 |
Fast curing speed
Light color
Low odor
High printing precision
Skin-friendly texture
Superior toughness and flexibility
High tensile strength and elongation
Tear resistance
Anti-yellowing
Mixing Ratio: A:B = 100:10 + 1.5–2% photoinitiator.
Application: Photopolymerized 3D hollow models, soles, insoles, and full shoes requiring flexibility and wear resistance.
Temperature: 25–40°C
Exposure Time: 6–9 seconds
Post-Curing: Bake at 90–100°C for 1–2 hours.
Printing Parameters:
Usage Range: -20°C to 100°C.
存放于干燥、清洁、通风良好的仓库中，避免光照和受热。
运输过程中防止泄漏、雨淋和曝晒。
在妥善储存条件下，SINOMER UVU6203-3DK1 的保质期为 12 个月。
